Interceptors

Find the right interceptor

Humphree offers several different models and sizes of Interceptor’s to be able to give your vessel the lift it needs to get up on plane faster or to reach the optimal running trim that will save fuel.

X-series, H-series, HE-series or HL-series

To create lift for the vessel there are two main criteria of the Interceptor, the width and the deployment of the interceptor blade. The Humphree Interceptors comes in different model series and sizes. So that you can find the right one for your vessel and in the right price range. The Humphree Interceptors comes in four different series:Hello

X-series

Width 300 - 750 mm
Deployment 50mm
Boat 23-60ft

HE-series

Width 350 - 1500 mm
Deployment 50mm
Boat 40-150ft

H-series

Width 500 - 1500 mm
Deployment 75mm
Boat 50-200ft

HL-series

Width 800 - 1500 mm
Deployment 110mm
Boat 50-150ft

Recommended interceptor sizes for semi-planing and planing boats

Humphree recommends using the column “Recommended”. Where space does not permit this size please refer to the description below regarding the limitations of the options. In some cases, the larger interceptor is not required if the boat has a natural “Low” trim mode, which means that a smaller size can be selected.

Our new HLS (Humphree Large Series) are built for large and heavy vessels. This interceptor is designed for continuos operation with the ability to service without docking. Interceptor size must be calculated for each specific vessel.

Boat Size	Recommended	Trim & List	List
23-27 ft	X300	X300	X300
28-33 ft	X450	X300	X300
34-39 ft	X600	X450	X300
40-44 ft	X750	X600	X450
45-49 ft	X750	X600	X450
50-54 ft	H900 or HE750	X750	X450
55-59 ft	H1000 or HE750	X750	X600
60-64 ft	H1200 or HE800	H900 or HE750	X600
65-69 ft	H1300 or HE900	H1050 or HE800	X750
70-74 ft	H1500 or HE1000	H1100 or HE850	X750

Size and deployment matters

The combination of Humphree interceptor width and interceptor blade deployment generates powerful lifting force to your vessel at semi planning speeds and up. The width of the Interceptor is to be chosen for your vessel to get the lift you want, a wider Interceptor means more lift. The Humphree interceptors utilise a blade deployment of 50mm for the X-series and the Standard H-series. The HE (Extended) series utilise 75mm blade deployment to give an efficient lift and the HL-series 110mm for even more power.

Since response time is crucial for efficient stabilization and safety, Humphree interceptor operates to full deployment of the blades in only 0.7 seconds.

Even if the space available on the transom is limited, the Humphree Interceptors with efficient 50mm blade deployment will give you enough lift.

Inquiries

We can assist you with choosing the right model for your vessel. Please get in touch.